Home>Products>Bearing Slewing Ring>192.20.1250.990.41.1502 Standard 5 Slewing Ring Bearings
Standard 5 192.20.1250.990.41.1502 MODELS
Need a CAD or 3D Model?
192.20.1250.990.41.1502 Standard 5 Slewing Ring Bearings
Bearing Slewing Ring
Standard 5 192.20.1250.990.41.1502 Bearing SPECIFICATIONS
192.20.1250.990.41.1502 Standard 5 Slewing Ring Bearings Needs China 608rs Bearing Supplier Analysis , Bearing Slewing Ring Manufacturing Service . Get 19 mm B Your Free.
- Standard 5
192.20.1250.990.41.1502
- 19 mm
- HMV 18 E
- 1.45 kg
- 80 mm
- M 90x2
- 65 mm
- 120 mm
- 90 mm
- China 608rs Bearing Supplier2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Specifications for Bearing Slewing Ring
- 19 mm
- HMV 18 E
- 1.45 kg
- 80 mm
- M 90x2
- 65 mm
- 120 mm
- 90 mm
Standard 5 192.20.1250.990.41.1502 Types of Bearing Slewing Ring
232.21.1075.013 Type 21/1200.2 Standard 5 Slewing Ring Bearings | Basic static load rating C0:735 kN; da min.:144 mm; Mass bearing:10.7 kg; D1 ≈:200.25 mm; db min.:167 mm; d:130 mm; Fatigue load limit Pu:83 kN; Da max.:215.4 mm; r3,4 min.:3 mm; Limiting speed:3400 r/min; D:230 mm; ra max.:2.5 mm; Calculation factor kr:0.2; d1 ≈:164 mm; B:64 mm; Limiting value e:0.3; Axial load factor Y:0.4; F:153.5 mm; r1,2 min.:3 mm; Reference speed:3200 r/min; |
231.21.0975.013 Type 21/1050.1 Standard 5 Slewing Ring Bearings | Cap bolt recommended tightening torque:515.2 N·m; RG:3/4 NPT; H:298.45 mm; Ca:77.8 mm; Da:250 mm; Housing:SSAFS 528; Mass pillow block:94.3 kg; P60°:301 kN; Initial grease fill:481.95 g; Stabilizing ring:SR-28-0; h:51.594 mm; PG:1/4 NPT; R1:87.313 mm; Pa:28.5 kN; P90°:180 kN; Cap bolt:3/4-10 UNC; A2:193.675 mm; S:4.763 mm; Eye bolt:2 x 3/8-16 UNC; H1:152.4 mm; |
162.28.1400.890.11.1503 Standard 5 Slewing Ring Bearings | B:18.00 mm; D:100.0000 mm; Oil Speed Rating Open/Shielded n2:77500 rpm; Grease Speed Rating Open/Shielded n1:6300 rpm; Basic Dynamic Radial Load Rating C:33800 N; Basic Static Radial Load Rating Co:27000 N; Accessories:Two Shields & Snap-R; Fillet Radius ra:1.00 mm; d:65.000 mm; Sealed Speed Rating n3:4000 rpm; |
92.30.1799.990.11.1502 Standard 5 Slewing Ring Bearings | Accessories:Without Accessories; d:340.000 mm; Fillet Radius ra:2.00 mm; D:420.0000 mm; Oil Speed Rating Open/Shielded n2:1500 rpm; Basic Static Radial Load Rating Co:255000 N; Sealed Speed Rating n3:0 rpm; B:38.00 mm; Basic Dynamic Radial Load Rating C:178000 N; Grease Speed Rating Open/Shielded n1:1200 rpm; |
61.25.1055.500.11.1503 Standard 5 Slewing Ring Bearings | Sealed Speed Rating n3:3700 rpm; B:31.00 mm; Basic Static Radial Load Rating Co:52000 N; Grease Speed Rating Open/Shielded n1:5200 rpm; D:130.0000 mm; Accessories:One Shield & Snap-Ri; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:87100 N; d:50.000 mm; Oil Speed Rating Open/Shielded n2:6300 rpm; |
230.21.1075.013 Type 21/1200. Standard 5 Slewing Ring Bearings | B:33 mm; Oil:6 700 min-1; Static (Cor):46.140 kN; d:40 mm; B1:mm; Grease:0.600 kN; with tapered bore:2308 ; rs Dynamic (Cr):1.5 mm; Pu:13.300 kN; with cylindrical bore:7 900 min-1; D:90 mm; |
12.30.1995.001.41.1503 Standard 5 Slewing Ring Bearings | Oil Speed Rating n2:11000 rpm; Basic Static Radial Load Rating Co:14000 N; Basic Dynamic Radial Load Rating C:20800 N; Accessories:Shield & Seal; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:8000 rpm; D:52.0000 mm; B:20.60 mm; Sealed Speed Rating n3:8000 rpm; d:25.000 mm; |
62.30.1400.000.11.1504 Standard 5 Slewing Ring Bearings | Mass adapter sleeve assembly:2.3 kg; B1:81 mm; d:110 mm; G:M 110x2; d3:145 mm; d1:101.6 mm; B:21.5 mm; Hydraulic nut:HMV 22 E; |
62.20.1094.575.01.1403 Standard 5 Slewing Ring Bearings | B:112 mm; B1:493 mm; G2:G 1/8; d3:950 mm; B5:141 mm; G3:13 mm; Mass adapter sleeve assembly:438 kg; d:750 mm; A:8 mm; d1:710 mm; Hydraulic nut:HMV 150E; G:Tr 750x7; |
61.25.0980.890.11.1503 Standard 5 Slewing Ring Bearings | s1:26.5 mm; Recommended diameter for attachment bolts, mm G:14 mm; A3:3.2 mm; Housing:FY 509 M/VZ033; Da:119.1 mm; d:45 mm; Fatigue load limit Pu:0.915 kN; T:50.5 mm; Db2:112 mm; A1:14 mm; L:137 mm; Db1:102 mm; Mass bearing unit:1.95 kg; Basic static load rating C0:21.6 kN; Thread grub screw G2:M6; Recommended tightening torque for grub screw:7.4 N·m; RG:1/4-28 UNF; J6:123 mm; Basic dynamic load rating C:33.2 kN; |
232.20.0900.503 Type 21/1050.2 Standard 5 Slewing Ring Bearings | H1:88.9 mm; Labyrinth ring:2 x LOR 33; N1:22.225 mm; h:36.513 mm; R1:53.181 mm; PG:1/8 NPT; da:57.15 mm; Cap bolt, SAE grade:8; J max.:279.4 mm; J min.:244.475 mm; H:167.481 mm; P120°:30.2 kN; P60°:83.2 kN; P90°:49.8 kN; Da:140 mm; Mass pillow block:17.1 kg; Pa:6.49 kN; End plug (suffix Y):EPR 7; Initial grease fill:175.77 g; H2:31.75 mm; |
91.35.1900.991.41.1502 Standard 5 Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:17000 rpm; B:12.00 mm; d:20.000 mm; Accessories:One Shield; Basic Dynamic Radial Load Rating C:9360 N; D:42.0000 mm; Sealed Speed Rating n3:11000 rpm; Oil Speed Rating Open/Shielded n2:20000 rpm; Fillet Radius ra:0.64 mm; Basic Static Radial Load Rating Co:5000 N; |
11.20.1385.000.11.1504 Standard 5 Slewing Ring Bearings | Oil Speed Rating n2:4300 rpm; d:95.000 mm; Oil Speed Rating Open/Shielded n2:4300 rpm; Grease Speed Rating Open/Shielded n1:3600 rpm; B:32.00 mm; Sealed Speed Rating n3:2400 rpm; Grease Speed Rating n1:3600 rpm; Basic Dynamic Radial Load Rating C:108000 N; Accessories:Snap-Ring; Fillet Radius ra:2.00 mm; D:170.0000 mm; Basic Static Radial Load Rating Co:81500 N; |
161.28.1500.891.21.1503 Standard 5 Slewing Ring Bearings | Basic Static Radial Load Rating Co:20400 N; B:25.40 mm; Oil Speed Rating n2:10000 rpm; Fillet Radius ra:1.00 mm; d:25.000 mm; Sealed Speed Rating n3:7500 rpm; D:62.0000 mm; Grease Speed Rating n1:7500 rpm; Basic Dynamic Radial Load Rating C:30700 N; Accessories:One Seal; |
61.40.1400.000.19.1504 Standard 5 Slewing Ring Bearings | Coefficient of friction µ max.:0.1; D:10 mm; Tolerance shaft:h8; Specific static load factor K0:20 N/mm²; Mass bushing:0.004 kg; Permissible sliding velocity v min.:0.25 m/s; B:10 mm; Specific dynamic load factor K:10 N/mm²; d:5 mm; Tolerance housing:H7; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ min.:0.05; |
161.36.1900.890.11.1503 Standard 5 Slewing Ring Bearings | Oil:106.560 kN; Grease:1020 kN; B1:76 mm; Weight:0 min-1; Pu:678 kN; Limiting speed for lubrication with:0 min-1; Static (Cor):98 mm; d:120 mm; D1:mm; B2 B Dynamic (Cr):mm; D:215 mm; |
No. | Brand | h | K | U | r | l | C | J | T |
282.30.1475.013 Type 110/1600.2 | Standard 5 | - | - | - | - | - | - | - | - |
280.30.1075.013 Type 110/1200. | Standard 5 | - | - | - | - | - | - | - | - |
12.30.1630.001.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
61.20.0944.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
282.30.1000.013 Type 110/1200.2 | Standard 5 | - | - | - | - | - | - | - | - |
162.36.2000.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
92.25.1310.990.11.1503 | Standard 5 | - | - | - | - | - | 33.325 mm | - | - |
12.25.1360.600.11.1503 | Standard 5 | - | - | - | - | - | 37 mm | - | - |
61.40.1800.013.19.1503 | Standard 5 | - | - | - | - | - | - | - | - |
61.40.1600.009.29.1503 | Standard 5 | - | - | - | - | - | - | - | - |
60.25.1155.500.11.1503 | Standard 5 | 19 mm | - | - | - | - | - | - | - |
12.20.1360.000.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
162.25.1120.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
281.30.1175.013 Type 110/1300.1 | Standard 5 | - | - | 25 mm | - | - | - | - | - |
192.20.1250.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
161.25.1250.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
231.20.0900.013 Type 21/1050.1 | Standard 5 | - | - | - | - | - | - | - | - |
162.25.1077.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
91.20.1006.990.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
282.30.1275.013 Type 110/1400.2 | Standard 5 | 60.325 mm | - | - | - | - | - | - | - |
232.20.0900.013 Type 21/1050.2 | Standard 5 | - | - | - | - | - | - | - | - |
62.25.1077.304.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
91.30.1415.991.21.1502 | Standard 5 | - | - | - | - | - | - | - | - |
11.20.0971.000.11.1504 | Standard 5 | 54.769 mm | - | - | - | - | - | - | - |
192.20.1250.990.41.1502 Standard 5 Slewing Ring Bearings Video
Standard 5 192.20.1250.990.41.1502 INTERCHANGE
Bearing Slewing Ring Part series 192.20.1250.990.41.1502 is a potential replacement for these common bearing part numbers:
192.20.1250.990.41.1502
192.20.1250.990.41.1502
192.20.1250.990.41.1502
192.20.1250.990.41.1502
192.20.1250.990.41.1502
192.20.1250.990.41.1502
192.20.1250.990.41.1502
192.20.1250.990.41.1502
Contact Us
- China 608rs Bearing Supplier
- AddressWellington Crescent, Fradley Park, Lichfield, Staffordshire, WS94 8RZ, UK
- Phone(Working Time)3782-445687
- Fax
Standard 5 192.20.1250.990.41.1502 Technical Articles
SKF PRICE LIST 2019 |
ZKL PRICE LIST |
DPI BEARING PRICE LIST |
Bearing Slewing Ring CATEGORIES
- 608rs Bearing
- 6207 Bearing
- sbr16uu Bearing
- skf 6006 Bearing
- skf 6206 2rs Bearing
- lm603011 Bearing
- ba2b Bearing
- 6206 ddu Bearing
- nu 309 Bearing
- din iso 12240 Bearing
- yat 206 Bearing
- skf 3207 Bearing
- fag 6305 Bearing
- tmma 75h Bearing
- skf 51204 Bearing
- nsk 6002 Bearing
- pac3016 Bearing
- skf 6306 c3 Bearing
- timken h715345 Bearing
- ra108rrb Bearing
- fag 6313 Bearing
- timken lm29710 Bearing
- vkd 13500 Bearing
- snv090 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Bearing
- Super Precision Angular Contact Bearings
- Slewing Ring
- Cylindrical Roller Radial Bearing
- Four-Row Cylindrical Roller Bearing
- Thrust Tapered Roller Bearing
- Thrust Roller Bearings
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings
- Multi Groove Belt
- Gates Green Stripe Belt
- Dayco Poly Rib Belt
- Acdelco 6k930
- Gates Htd Belts